
*******************************Release Note******************************************

This Package is for all Archer receiver models except RS. 

Version and Files: 
Archer-X_2.1.5.frsk                         Firmware for all Archer receiver models except RS.
readme.txt                                         Release note 

Firmware Version: v2.1.5

The release firmware resolved the issues below:
--------------------------------------------------------------------------------------------------------------------
1. Add support for SR6/SR8 PRO/SR10 PRO
2. Change OTA behavior (see procedure below) and fix the issue of requiring registration to show the correct receiver version after OTA
3. Limit the output range of SBUS/FPORT to 885uS ~ 2115uS
-------------------------------------------------------------------------------------------------------------------
How to update Archer receiver firmware :

1. Put the firmware under the folder [FIRMWARE] of SD card.
2. Register and bind the receiver with your radio, keep the receiver under working mode. 
3. Find the firmware file in SD folder, select it by press [ENT].
4. Select Flash receiver OTA, re-cycle the receiver power and wait for flash ends.
5. Wait for 5 seconds to have communication recovered ( Version 2.1.5 or above ).
For version below 2.1.5 , Re-cycle the receiver power and wait for 3 seconds to have connection with your radio again.

Note: Receiver is still supported with flashing firmware by s.port wire connection to a radio.
---------------------------------------------------------------------------------------------------------------------
More details please check FrSky website.
https://www.frsky-rc.com/product-category/receivers/2-4ghz-access/archer-series/

**********************All rights reserved to FrSky Electronic ., Ltd.*********************************
